Each ComAp controller needs firmware and configuration for its operation.
- Firmware (FW) = operation system of the unit.
- Configuration (also called Archive) = application settings/parameters and functions, IOs definition, PLC, ECU, etc. It also contains history log saved from monitoring software (InteliMonitor, LiteEdit, InteliConfig).
New FW (together with default Archives) can be obtained from product page on our website or using the InteliBot’s Download section. After download, you can double click on the file (typically *.psi or *ixc) to import all needed files into your library (in your computer - see below where you can find it). By using configuration tools (such as GenConfig, DriveConfig, InteliConfig, LiteEdit) you can also upgrade the FW of your controller (you need to be connected to that controller, it is recommended over cable).
Default application files are available:
- directly in InteliConfig „New configuration“ window
- (typically) C:\Users\Public\Documents\ComAp PC Suite\GenConfig\Archives\Default (or DriveConfig) folder for InteliGen and InteliSys NT units.
If you want to change your IGS-NT unit from SPtM to MINT application, you can simply choose this default file in the configuration SW and write it into the unit.
FW and configuration file version has to match, (e.g. 4.1.x FW version, you need 4.1.x archive version – 3.9.x would not be allowed to be written into the unit). Configuration/Archive files are usually upgradeable using our SW Tools (GenConfig, DriveConfig, InteliConfig).
We do recommend to use for every new project the newest FW that is available. In case that you miss or you are not satisfied with some features, you can also upgrade the FW and the archive the newest version.